- 產品詳情
Introduction and features:
This equipment is developed on the basis of small batch, hollow, high and low break, SMT process, in order to shorten the movement of personnel and reduce the touch and handling process of personnel.
Mainly used in: hollow products (before sticking steel sheet), high and low step products, SMT products, etc. Different cleaning heights can be set according to product characteristics, which can meet 250mm/260mm double-row or 610mm single-row production. It uses patented magnetic levitation transmission. Completely solve the debris generated by the friction of the traditional gear transmission, at the same time, it can monitor the temperature and speed of the cleaning nozzle in real time, and set the operating speed according to the needs of different products; it can be connected to the MES system to collect and upload production information in real time.
Advantage:
? Applied to hollow products (before sticking steel sheet), high and low break products, SMT products, etc.
? Patented magnetic levitation drive system, no friction debris
? The transmission parts adopt servo motors to precisely control the cleaning height and speed
? There are a total of 10 nozzles for the upper and lower plasmas, and the front and back sides are cleaned simultaneously without blind areas
? Independent nozzle temperature sensor to monitor and record temperature changes
? Using industrial computer control, docking with MES system, receiving and feeding back production information
? Patented nozzle speed and energy monitoring system.
? The function of not sticking the board and not burning the board.
? Super high CPK capability.
? Double ventilation and cooling system.
? Accurate monitoring: plasma height, density, speed, power, etc.
Basic specifications of the machine:
Maximum machine size | 2420mm(L) ×1600mm(W) × 2200mm(H) |
Input voltage | AC220V / 50Hz / 8KW |
Pneumatic pressure | 7 kg/cm2 |
Product width | Double row 250mm/260mm or single row 610mm |
Production speed | 0.1-4 m/min (according to product characteristics) |
Working height | 950mm-1050mm |
Gross weight | 1000kg |
* Equipment design and specifications can be adjusted to improve equipment performance.